Fenco Banking Vault & Safe Interiors 3 Compartment 2303-17-A -16-1/4″W x 17″D x 15-11/16″H Champagne

With encouragement and input from our national dealer base, FENCO has introduced a new product line, Vault & Safe Interiors. We have designed a variety of models to satisfy your many needs. All models are offered in both a 17″ & 24″ depth, all of which are available with a variety of lock options. Our Vault & Safe Interiors are designed to compete against Diebold’s double wall construction product line. Previously your options were limited to present either a hard-iron solution (too expensive, too long to get) or a soft-metal solution (which is too difficult to work with dimensionally & configuration-wise). We now have your solution to Volt & Safe Interiors. Please specify left or right hinge when ordering.

Features

• Teller Design – Design the layout that suits your needs best.
• Integrated, Unibody Doublewall Construction – Unit welded 18 gauge sheet metal construction; corners welded & ground flush; no overlapping metal seams
• Multiple Locking Options – Keylocks, mechanical combination locks & (2) electronic combination locks (LaGard 33E, S&G #6123) available on any door.
• Solid Plate Doors – .125″ thickness; hot rolled, pickled and oiled.
• Easy Unit Fastening – All units feature fastening knockout in unit top and fastening cage nuts aligned in bottom.
• Safe Deposit Box Dimensions – FENCO’s vault & safe interior unit dimensions in width and depth.
• Cash Drawer Insert – ((2) rows for loose bills compartment with follow block) is available to be installed in any compartment.
• You may stack & fasten units up to 3 high. It is recommended to design your layout with the largest unit on the bottom & to always fasten all units to each other.
• If you’re designing a vault utilizing FENCO’s safe & vault units in conjunction with safe deposit boxes, DO NOT stack safe deposit boxes on top of FENCO’s safe & vault units.
• FENCO’s adjustable shelf carries a static capacity of 75 lbs. evenly distributed.
• Left hand swing is standard on single width units; right hand swings are also available.
• Although FENCO’s vault & safe units casings are designed to a 17″ or 24″ deep specification, you must add to the casing depth the required lock depth.