M Matting Corrugated Switchboard Mat, 1/4″ Thick, 3′ x 75′, Black

Corrugated switchboard designed to protect workers from electrical shock by insulating against high voltage

Features:

• Type II, Class 2 (meets additional testing for flame, oil, and ozone resistance)
• Conforms to ASTM D-178-01 testing
• Tested dielectric strength is 30,000 volts
• Maximum use voltage is 17,000 volts
• 1/4″, non-conductive

Standards & Testing

• Passes electrical proof test ASTM D178 (Min. 20,000 V for one minute)
• Passes dielectric breakdown test ASTM D149 (Min. 30,000 V)
• Passes O3 resistance test method B ASTM D178 (any visual degradation)
• Tensile strength ASTM D412 DIE C (Minimum 700 PSI): 1,318 PSI, PASS
• Elongation ASTM D412 DIE C (Minimum 250%): 317%, PASS
• Tension set ASTM D412 DIE B (Maximum 0.50 in.): 0.4827 in., PASS
• Moisture absorption ASTM D570 (Maximum increase 3%): 0.09%, PASS
• Accelerated aging ASTM D573 (Minimum 50% of original tensile strength): 1,363 PSI (103% of original tensile strength), PASS
• Flame resistance ASTM D178 Appendix (Maximum 0.5 in./12.7mm after 30 seconds): 0.12 mm/s, PASS
• Oil resistance ASTM D471 (Maximum volume increase 4%): 0.04%, PASS

Cleaning Instructions:

• Scrubbing with a deck brush (when needed)
• Using detergent with a neutral pH
• Rinsing with a hose or pressure washer
• Mat should be laid flat or hung to dry
• Always make sure the mat is dry before placing it back in service